特點   Features

◎  熱風多次穿過物料層與物料逆向流動，使熱交換充分，熱效率高。

◎  結構緊湊，占地面積小。

◎  物料在床內停留時間可調節，操作方便。

◎  物料沿螺旋床自下而上作圓周運動的同時，自身也產生跳躍，從而增加了物料與熱風的接觸，增強了干燥效果。

◎  連續的進出料適合于流水線，并且易達到GMP規范，可代替?zhèn)鹘y(tǒng)的箱式干燥。

◎  對物料的表面及形狀基本沒有損傷，不僅保證了丸劑的圓度，而且大大的降低了丸劑的破碎率。

◎  Because the hot air passes through the layer of raw material several tiers and acts counter motion towards the raw material, the heat exchanger is fully preferment and thermal efficiency is high.

◎  The structure is compact and it occupies small area.

◎  The stay time of raw material in thehelix bed can be adjusted and the operation is very convenient.

◎  The raw material acts the motion if circle at helix bed from up to low, at the same the equipment can jump itself, so the contact surface between hot air and raw material is increased too and the dry effects is strengthened.

◎  The equipment is suitable for continuous operation because of continuous feeding and discharging raw material Meanwhile it is easy to meet the requirements of GMP.

◎  It does not damage the surface and shape of raw material basically. It can not only maintain the roundness of pill but also decrease the rate of pills.

----------------------------------------------------------------------------------------------------------------

應用   Application

        LZG螺旋振動干燥機主要適用于中藥丸劑的干燥，也可適用于化工、制藥、食品、塑料、建材、飼料等行業的顆粒狀、短條狀、球狀物料的干燥。

LZG helix vibration drier is mainly used for drying pill of Chinese traditional medicine. It can also be suitable for drying granule, short strip and ball raw material of chemical industry, pharmaceutical industry, foodstuff industry, construction material industry, feed industry and so on.

----------------------------------------------------------------------------------------------------------------

結構示意圖   Schematic of structure

----------------------------------------------------------------------------------------------------------------

技術參數   Technical parameters